Product Philosophy
Owning an exclusive cloakroom is not just every girl’s dream, boy’s various shirts and suits, as well as their favorite basketball shoes, they all need an independent storage space. You don’t want to trap by the size of your home. Although the large cloakroom isnice, as long as the partition function is properly planned, Emoono’s non-deformationsystem wardrobe allows creating variety independence cloakroom in a small space.
Product Features
Emoono’s all-aluminum system bathroom is moisture-proof, mildew-proof, and easy to clean. It can match various interior decoration styles. No matter coastal, Scandi Design, classical gorgeous, and minimalist; whether it is wood grain, or other colors and materials, all can be customized. The aluminum alloy system cabinet has both taste and environmental friendliness, Emoono makes the cloakroom the most stylish existence in the house.
-
Joined board
The joined board is composed of multiple sections spliced together, there will be a butt gap between the profile and the profile, the extruder and die determine the width of the aluminum profile. Therefore, the joined board can only be spiced into the required size by a fixed width profile.Although the profile of the joined board has a fixed width limit, there is no height limit. General furniture is limited to 240 cm high, while the furniture composed of panel structure can be customized according to requirements; it has extensive applicability, especially open space and high field.
-
Whole board (seamless honeycomb board)
The whole board technology can avoid tedious splicing steps. Except that there will be no obvious gaps or interfaces in appearance, the aluminum furniture made of the whole board has a stable structure, the edge-free bending technology of honeycomb board makes aluminum alloy furniture no different from ordinary wooden furniture in terms of integrity and appearance, and no general furniture is prone to have the disadvantage of excessive formaldehyde.
Aluminum has the characteristics of high recycling and high utilization rate, and it is the first choice for environmental protection and green energy furniture.
Wood grain heat transfer.
Aluminum alloy profile is made of aluminum raw material through high temperature extrusion, and then by heating and pressurizing, the wood grain pattern on the transfer paper is quickly transferred and penetrated to the aluminum profile. No glue is needed, avoiding the formaldehyde hazard that may be generated when using adhesives.
Thermal transfer technology enables aluminum furniture to have a simulated wood grain visual effect, and can enhance the surface protection of aluminum. The wood grain transfer process can naturally present the wood grain texture on the aluminum profile, which is an ideal energy-saving and environmentally friendly material that can replace wood.
Heat shielding film
The polymer material film treated by special technology is coated on aluminum profile after high temperature.
Making the surface not only visually, but you can have the simulation sense of touching just like rough, smooth, horizontal and vertical wood, stone or other materials. Emoono’s all-aluminum system kitchen cabinets are moisture-proof, mildew-proof and corrosion-resistant, and can be matched with various interior decoration styles.
No matter if it is industrial style, country style, classical gorgeous or simple design.Whether it is wood grain, or other colors and materials, all can be customized!
Paint
Generally speaking, common paint methods for aluminum alloy include ordinary paint, metallic paint and fluorocarbon paint, etc. Emoono Home uses fluorocarbon paint as the surface baking paint coloring treatment method for various household products.
After the surface of aluminum extrusion profile is processed with fluorocarbon paint, the surface weather resistance and chemical resistance can be increased. Especially excellent non-stick and low friction properties, it is not easy to pulverize and discolor after long-term use, and it’s resistant to alcohol and solvents, not easy to stain and scrub. It can last for more than 15 years or even longer.
Anodizing
Anode treatment is to place the metal to be treated on the anode end and generate an oxide film on the metal surface through electrolysis. And through electrolysis, an oxide film is formed on the metal surface.
After oxidation and coloring of aluminum, the surface will be transformed into a layer of oxide film, which has the function of decoration and protection for aluminum. Under normal circumstances, it will be dyed and sealed or sprayed after oxidation to increase its corrosion resistance.
The electrolytic coloring after anodizing is different depending on the size distribution of the precipitated particles, and color tone is also different. Common electrolytic coloring includes champagne, bronze, golden, claret, black and so on.
-
Joined board
The joined board is composed of multiple sections spliced together, there will be a butt gap between the profile and the profile, the extruder and die determine the width of the aluminum profile. Therefore, the joined board can only be spiced into the required size by a fixed width profile.Although the profile of the joined board has a fixed width limit, there is no height limit. General furniture is limited to 240 cm high, while the furniture composed of panel structure can be customized according to requirements; it has extensive applicability, especially open space and high field.
-
Whole board (seamless honeycomb board)
The whole board technology can avoid tedious splicing steps. Except that there will be no obvious gaps or interfaces in appearance, the aluminum furniture made of the whole board has a stable structure, the edge-free bending technology of honeycomb board makes aluminum alloy furniture no different from ordinary wooden furniture in terms of integrity and appearance, and no general furniture is prone to have the disadvantage of excessive formaldehyde.
Aluminum has the characteristics of high recycling and high utilization rate, and it is the first choice for environmental protection and green energy furniture.
Wood grain heat transfer.
Aluminum alloy profile is made of aluminum raw material through high temperature extrusion, and then by heating and pressurizing, the wood grain pattern on the transfer paper is quickly transferred and penetrated to the aluminum profile. No glue is needed, avoiding the formaldehyde hazard that may be generated when using adhesives.
Thermal transfer technology enables aluminum furniture to have a simulated wood grain visual effect, and can enhance the surface protection of aluminum. The wood grain transfer process can naturally present the wood grain texture on the aluminum profile, which is an ideal energy-saving and environmentally friendly material that can replace wood.
Heat shielding film
The polymer material film treated by special technology is coated on aluminum profile after high temperature.
Making the surface not only visually, but you can have the simulation sense of touching just like rough, smooth, horizontal and vertical wood, stone or other materials. Emoono’s all-aluminum system kitchen cabinets are moisture-proof, mildew-proof and corrosion-resistant, and can be matched with various interior decoration styles.
No matter if it is industrial style, country style, classical gorgeous or simple design.Whether it is wood grain, or other colors and materials, all can be customized!
Paint
Generally speaking, common paint methods for aluminum alloy include ordinary paint, metallic paint and fluorocarbon paint, etc. Emoono Home uses fluorocarbon paint as the surface baking paint coloring treatment method for various household products.
After the surface of aluminum extrusion profile is processed with fluorocarbon paint, the surface weather resistance and chemical resistance can be increased. Especially excellent non-stick and low friction properties, it is not easy to pulverize and discolor after long-term use, and it’s resistant to alcohol and solvents, not easy to stain and scrub. It can last for more than 15 years or even longer.
Anodizing
Anode treatment is to place the metal to be treated on the anode end and generate an oxide film on the metal surface through electrolysis. And through electrolysis, an oxide film is formed on the metal surface.
After oxidation and coloring of aluminum, the surface will be transformed into a layer of oxide film, which has the function of decoration and protection for aluminum. Under normal circumstances, it will be dyed and sealed or sprayed after oxidation to increase its corrosion resistance.
The electrolytic coloring after anodizing is different depending on the size distribution of the precipitated particles, and color tone is also different. Common electrolytic coloring includes champagne, bronze, golden, claret, black and so on.